 |
 |
The High Mounting Eagle Motion Detector (PN: 10EAGLE1HM) nd technology combined with digital processing to assure a
sharp, stable activation pattern with outstanding adjustability.
|
|
| |
|
 |
 |
|
The Falcon’s state-of-the-art microprocessor and flat
antenna provide the ability to disregard pedestrians
and only allow large masses (such as trucks and forklifts)
to be detected-even at lower mounting heights. |
|
| |
|
 |
 |
The FlexIR is a light beam
flexible mounting bracket
that prevents BEA's Microcell system
from damage when installed away
from the door Jamb surface. |
|
| |
|
 |
 |
|
With more standard features
than any other loop detector
on the market, the Matrix2-S
has the flexibility, compatibility
and performance to maximize
productivity and safety
on your site. |
|
| |
|
 |
 |
| The low profile
MT21 is flame retardant and will not release harmful
gases or fumes. This edge mounts directly to doors
with accepting double L-angle bottom bars. |
|
| |
|
 |
 |
|
The MT22 mounts directly to doors with accepting double L-angle
bottom bars. No mounting channel required. |
|
| |
|
 |
 |
| For installation
on rolling doors or grilles with accepting bottom
bar profile, simply slide out existing weather
seal and slide in MC22. |
|
| |
|
 |
 |
| This
touch sensitive switch
can be adapted to suit
a wide variety of applications.
It is manufactured to
user specifications
for length, sensitivity
and outlet location.
When touched lightly
or at an angle, the
ME103 sends an immediate
signal to stop, start
or reverse operations
depending upon your
particular application.
Multiple mounting channel
designs allow for easy
installation on nearly
any surface. |
|
| |
|
 |
 |
For installation
on light-weight grille and shutter applications
with minimal over-travel. Use on or near gates
for pinch point protection.
 |
|
| |
|
|
 |
 |
|
The
ME112 is designed for
use on doors up to
1-1/4 inches thick.
To install; slide the
edge into the mounting
channel and then mount
the assembly to the
door. |
|
|
|
 |
 |
|
The ME113 is designed for use on
1-1/4 to 1-1/2 inch thick doors and gates. To install;
slide the edge into
the mounting channel
and then mount the
assembly to the door. |
|
| |
|
|
|
 |
 |
|
The Patriot Telescopic Non-Contact
SensingEdge is manufactured to work with Rapid Roll
and Sectional Doors. The system consists of a Control
Unit, Emitter Eye and a Receiver Eye which simply
mounts into a rigid steel, spring loaded retracting
arm. The arms are mounted to the bottom of the door
and extend below the leading edge of the door, thus
providing an invisible infrared beam of protection.
If the beam is blocked by an object or person below
the door, the control unit signals the door operator
to stop and/or reverse. |
|
| |
|
 |
 |
|
The Patriot Z-Flap Non-Contact SensingEdge
is manufactured to work with Rolling Steel and Sectional
Doors. The system consists of a Control Unit, Emitter
Eye and a Receiver Eye which simply mounts into a
flexible molded Z-Flap mounting bracket made of Dupont
Hytrel®. The Z-Flaps are mounted
to the bottom of the door and extend below the leading
edge of the door, thus providing an invisible infrared
beam of protection. If the beam is blocked by an
object or person below the door, the control unit
signals the door operator to stop and/or reverse. |
|
| |
|
 |
 |
|
The Miller Edge Model
MWT02 gate and door edge transmitter is designed
to provide obstacle sensing protection for a variety
of motorized gates and doors. |
|
| |
|
 |
 |
|
The Miller Edge Model MWTA02
gate and door edge transmitter is designed to provide
obstacle sensing protection for a variety of motorized
gates and doors. The Model MWTA02 is available with
an Audible Alarm feature that activates when the
battery has only 25% of its life remaining, indicating
the battery should be replaced. |
|
| |
|
 |
 |
|
Both the Miller Edge receiver and transmitters are designed
to have several selectable options not found on other
radio controls. Simply select these options with the
convenient dip switches and wire harness. The receiver
will operate on either 12 or 24 volt AC or DC and is
capable of sending a pulse or continuous signal. |
|
| |
|
 |
 |
|
Both the Miller Edge receiver and
transmitters are designed
to have several selectable
options not found on
other radio controls.
Simply select these
options with the convenient
dip switches and wire
harness. The 3-channel
receiver will operate
on either 12 or 24 volt
AC or DC and is capable
of sending a pulse or
continuous signal. |
|
| |
|
 |
 |
|
The Miller Edge Model MWCK02 gate
and door edge transmitter and receiver kit is designed
to provide a fully reliable, self-checking communication
between the 4-wire SensingEdge and the door or
gate motor operator. When the SensingEdge detects
an obstruction, a fault condition is communicated
to the transmitter and the receiver. The signal
is then passed on to the motor operator to control
the motion of the door or gate. |
|
| |
|
