The low profile
MT21 is flame retardant and will not release harmful
gases or fumes. This edge mounts directly to doors
with accepting double L-angle bottom bars.
The
Miller Edge Model
MWCK02 gate and door
edge transmitter and
receiver kit is designed
to provide a fully
reliable, self-checking
communication between
the 4-wire SensingEdge
and the door or gate
motor operator. When
the SensingEdge detects
an obstruction, a fault
condition is communicated
to the transmitter
and the receiver. The
signal is then passed
on to the motor operator
to control the motion
of the door or gate.
The Miller Edge Model MWT02 gate
and door edge transmitter is designed to provide
obstacle-sensing protection for a variety of motorized
gates and doors.
The Miller Edge Model MWTA02 gate
and door edge transmitter is designed to provide
obstacle-sensing protection for a variety of motorized
gates and doors. The Model MWTA02 is available with
an Audible Alarm feature that activates when the
battery has only 25% of its life remaining, indicating
the battery should be replaced.
Both the Miller Edge receiver and
transmitters are designed to have several selectable
options not found on other radio controls. Simply
select these options with the convenient dip switches
and wire harness. The receiver will operate on either
12 or 24 volt AC or DC and is capable of sending
a pulse or continuous signal.
Both the Miller Edge receiver and
transmitters are designed
to have several selectable
options not found on
other radio controls.
Simply select these
options with the convenient
dip switches and wire
harness. The 3-channel
receiver will operate
on either 12 or 24 volt
AC or DC and is capable
of sending a pulse or
continuous signal.
