Gate Safety

Motorized gates require special safety precautions. ANSI/UL325 is the accepted standard for gate safety and includes specifications for designing safe gate systems that protect against entrapment and hazardous pinch points. Gate Edge Sensors and photo eyes are key components of a safe gate system.

All Miller Edge Gate Edges and Photo Eye sensors are recognized components of ANSI/UL325 standard for gate safety. For a free easy reference guide to compliance with the ANSI/UL325 gate safety standard, email us at info@milleredge.com

Miller Edge manufactures gate edge sensors for use on motorized Horizontal Sliding Gates, Swinging Gates, Vertical Lift, Vertical Pivot and Barrier Gate arms.

Invisi-Guard photo optic sensor offers thru beam photo eye protection with a wireless emitter and includes a low battery audible alarm. With InvisiGuard, there is no need to saw concrete to run wiring across the opening.

Horizontal Sliding Gates

ME120 Single sided sensitivity.

MGO20 Three sided sensitivity.

ME123 Single sided sensitivity for 2" square posts.

MGR20 Wrap around sensitivity for 2" round posts.

MGS20 Wrap around sensitivity for 2" square posts.

<Back to Top of Page>

Swing Gates

MGO20 Three sided sensitivity.

MGR20 Wrap around sensitivity for 2" round posts.

MGS20 Wrap around sensitivity for 2" square posts.

<Back to Top of Page>

Vertical Lift Gates

ME120 Single sided sensitivity.

MGO20 Three sided sensitivity.

ME123 Single sided sensitivity for 2" square posts.

MGR20 Wrap around sensitivity for 2" round posts.

MGS20 Wrap around sensitivity for 2" square posts.

<Back to Top of Page>

Vertical Pivot Gates

ME120 Single sided sensitivity.

MGO20 Three sided sensitivity.

ME123 Single sided sensitivity for 2" square posts.

MGR20 Wrap around sensitivity for 2" round posts.

MGS20 Wrap around sensitivity for 2" square posts.

<Back to Top of Page>

Barrier Gate Arms

ME110 Single sided sensitivity.

ME111 Single sided sensitivity.

MGO20 Three sided sensitivity.

<Back to Top of Page>